Eneo DMR-104 Instrukcje Operacyjne Pobierz pdf (Strona 29)

Digital Video Recorder

Highlight the Settings box beside Check Alarm-In and press the

button. You can select the interval that you want

the DVR to run self-diagnostics on Alarm Inputs. You can select from 1 hr. to 30 days or Never.

Highlight the Settings box beside Disk Almost Full, and press the

button. Select the percentage level of disk usage

at which you want the DVR to trigger an alert. Percentage levels range from 80% to 99%.

Highlight the Settings box beside Disk Bad, and press the

button. Select percentage level of bad disk sectors at

which you want the DVR to trigger an alert. Percentage levels range from 10% to 90%.

Highlight the Settings box beside Disk Temperature, and press the

button. Select the temperature of hard disk

drive at which you want the DVR to trigger an alert if the temperature exceeds the defined threshold. Refer to the hard

disk drive manufacturer’s documentation for the correct temperature setting.

The DVR can be set to react to system events. Highlight the Actions box beside the desired event and press the

button. System events can be associated with an Alarm-Out connector, sound the DVR’s internal buzzer, and/or notify

a number of different devices.

NOTE: Alarm-Out action cannot be set to System and Panic Record events.

Mail notify is the only option available for the System event.

For the Notify action to work, the DVR should be registered in the RAS (Remote Administration System).

Recording Setup

General

Highlight General and press the

button, and the General setup screen appears.

Figure 13 : Record – General setup screen.

Highlighting Recycle and pressing the button toggles between On and Off. In the Recycle mode, the DVR records

over the oldest video data once all available storage space has been used. When Recycle is turned off, the DVR stops

recording once all available storage space has been used.

Highlight the Event Record Dwell box and set the length of time you would like to record for the associated event.

You can set the dwell from 5 seconds to 15 minutes. Refer to Event Actions screen in this chapter for information

regarding event recording.

Highlighting De-Interlace and pressing the button toggles between On and Off. When set to On, the DVR will

turn the de-interlace filter on while recording video with Very High (D1) resolution.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 87 88

Brak uwag

Eneo DMR-104 Instrukcje Operacyjne Strona 29